HOME   INTRO   HISTORY   PRODUCTS   NEWS

CS CURRENT SENSING
RESISTORS

Download
PDF File

INTRODUCTION
 -Low TCR from +-100ppm TO +-600ppm
-Resistance values from 10mohms TO  1ohm
-Utilizes a high purity alumina substrate for high power dissipation
-Applications: SMPS (DC-DC converter, charger, adaptor), monitor, NB, MB (For power management)

GENERAL SPECIFICATIONS
Model Power Rating [W] Operating Temp. Resistance[ohm] TCR [ppm] Tolerance[%]
CS02 (0402) 1/16 -55C-125C 50m - 100m
101m - 500m
501m - 1000m		 +-400
+-300
+-200		 +-1
+-2
+-5
CS03 (0603) 1/10 20m - 50m
51m - 100m
101m - 500m
501m - 1000m		 +-600
 +-400
+-300
+-200
CS05 (0805) 1/8 20m - 50m
51m - 100m
101m - 500m
501m - 1000m		 +-600
 +-400
+-300
+-200
CS06 (1206) 1/4 10m - 20m
21m - 50m
51m - 500m
501m - 1000m		 +-600
+-400
+-300
+-200
CS10 (2010) 3/4
CS12 (2512) 1
CS25 (1225) 3 3m - 10m
11m - 19m
20m - 50m
51m - 200m		 +-450
+-300
+-200
+-150
CS37 (3720) 1 10m - 19m
20 - 500m		 +-300
+-150
CS75 (7520) 2 1m - 4m +-300
5m - 10m
11m-350m		 +-200
+-150

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡


CHARACTERISTICS                                                  Values in [ ] mean change in ohmic value after test

Thermal Shock +- (0.5%+0.05 §Ù ) MIL-STD-202F, Method 107G : -55C to +125C ,100 cycles
Short Time Overload +- (0.5%+0.05 §Ù ) JIS-C-5202-5.5 : RCWV *2.5 or Max Overload Voltage, 5seconds
Dielectric Withstand V by type

MIL-STD-202F Method 301, Max Overload Voltage for 1min.
Load Life +- (1.0%+0.05 §Ù ) MIL-STD-202F M108A : RCWV,70 C,1.5hrs. ON, 0.5hrs OFF 1000 to 1048 hrs.
Resistance to Solder Heat +- (0.5%+0.05 §Ù )

MIL-STD-202F Method 210E : 260 +- 5 C, 10 +- 1 second
Humidity (Steady State) +- (1.0%+0.05 §Ù ) MIL-STD-202F, Method 103B: 40C , 90 to 95% RCWV, 1.5hrs on,0.5hrs off, 1000 to 1048hrs
Low Temp. Operation +- (0.5%+0.05 §Ù ) JIS-C-5202-7.1 1 hrs, -65C , followed by 45 min. of RCWV
Temp. Coefficient of R As Spec. MIL-STD-202F, Method 304 :+25/-55/+25/+125/+25C
Insulation Resistance >1000M §Ù MIL-STD-202F Method 302 Apply 100Vdc for 1 minute
Resistance to dry heat +- (0.5%+0.05 §Ù ) JIS-C-5202-7.2 96hrs. @ +125C without load
Bending Strength As Spec. JIS-C-5202-6.1.4 Bending Amplitude 3mm for 10sec
Solderability 95% min coverage MIL-STD-202F Method 208H 235 +- 5C ,10 +- 1 sec.

¡¡

¡¡

¡¡

¡¡

¡¡

¡¡


DIMENSIONS

Model DIMENSIONS [mm]
L W T D1 D2
CS02 1.00 +- 0.05 0.50 +- 0.05 0.32 +- 0.05 0.25 +- 0.10 0.20 +- 0.10
CS03 1.60 +- 0.10 0.80 +- 0.10 0.45 +- 0.10 0.30 +- 0.20 0.30 +- 0.20
CS05 2.00 +- 0.15 1.25 +- 0.15 0.50 +- 0.10 0.30 +- 0.20 0.30 +- 0.20
CS06 3.10 +- 0.15 1.55 +- 0.15 0.60 +- 0.10 0.50 +- 0.30 0.40 +- 0.20
CS10 5.00 +- 0.15 2.50 +- 0.15 0.60 +- 0.10 0.60 +- 0.30 0.50 +- 0.25
CS12 6.30 +- 0.15 3.10 +- 0.15 0.60 +- 0.10 0.60 +- 0.30 0.50 +- 0.25
CS37 3.75 +- 0.20 2.00 +- 0.20 0.60 +- 0.10 0.40 +- 0.20 0.40 +- 0.20
CS75 7.50 +- 0.30 2.00 +- 0.20 0.60 +- 0.10 0.40 +- 0.20 0.40 +- 0.20

PACKAGING REEL SPECIFICATIONS

Model DIMENSIONS [mm] paper Tape
[pcs] 		Emboss Plastic Tape[pcs]
¨ªA ¨ªB ¨ªC W T
CS02 178+-1 60+-1 13+-1.0

9.0+-0.5

11.4+-1.0

 10,000 ¡¡
CS03 5,000
CS05
CS06
CS10

14.0+-0.5

16.4+-1.0

 ¡¡ 4000
CS12
CS25
CS37
CS75 17.0+-0.5 19.0+-1.0

PAPER TAPE SPECIFICATIONS

Model A B W F E P1 P2 P0 ¨ªD0 T
CS02 0.62 +- 0.05 1.12 +- 0.05 8.00 +- 0.10 3.50 +- 0.05 1.75 +- 0.05 2.00 +- 0.02 2.00 +- 0.05 4.00 +- 0.05 1.55 +- 0.05 0.50 +- 0.10
CS03 1.10 +- 0.10 1.90 +- 0.10 4.00 +- 0.05 0.70 +- 0.10
CS05 1.60 +- 0.15 2.40 +- 0.20 0.80 +- 0.10
CS06 2.00 +- 0.15 3.60 +- 0.20 0.80 +- 0.10

EMBOSSED PLASTIC TAPE SPECIFICATION

Model A B W F E P1 P2 P0 ¨ªD0 T1
CS10 2.85 +- 0.10 5.45 +- 0.20 12.00 +- 0.10 5.50 +- 0.05 1.75 +- 0.05 4.00 +- 0.05 2.00 +- 0.05 4.00 +- 0.05 1.50 +- 0.10 1.00 +- 0.20
CS10 3.40 +- 0.10 6.65 +- 0.20
CS25 3.38+-
0.10		 6.68 +-
0.10		 12.00 +- 0.30 5.50 +-
0.10		 1.55 +-0.05 1.45 +- 0.20
CS37 2.50 +- 0.20 4.45 +- 0.20 5.50 +- 0.05 1.50 +- 0.10 1.50 +- 0.10
CS75 2.50 +- 0.20 8.30 +- 0.20 16.00 +- 0.30 7.80+- 0.05

¡¡

ORDERING INFORMATION

Copyright©, RARA Electronics Corporation
 Tel:82-32-817-4325 Fax:82-32-817-4329