RA RESISTOR ASSEMBLIES

Download PDF File

The RA series of  power, metal clad, wire wound resistors are designed for use in power inverters.  The basis for
these models is an IRH or IRV resistor surrounded by a metal case, which conforms to international safety
specifications. The steel case is powder coated and baked for durability.

GENERAL SPECIFICATIONS

Model	Internal Resistor	Free Air Wattage Rating	Resistance Range [ohms]		Resistance Tolerance
			Inductive	Non-Inductive
RA080	IRH80	80	0.1-910	0.1-110	+-0.5(D) +-1.0(F) +-2.0(G) +-5.0(J) +-10(K)
RA100	IRH100	90	0.1-1.1K	0.1-240
RA200	IRH200	140	0.1-2.2K	0.1-1K
RA300	IRH300	210	0.1-2.7K	0.1-1.5K
RA400	IRH400	240	0.1-4.3K	0.1-2.2K
RA500	IRH500	300	0.1-6.8K	0.1-3K
RA600	IRV600	320	0.1-94	0.1-23
RA800	IRV800	360	0.1-112	0.1-28
RA1000	IRV1000	400	0.1-140	0.1-36

CHARACTERISTICS

1/Temperature Range	-55C to +200C
2/Insulation Resistance	20Mohms minimum
3/Dielectric Strength	Available options:  1500, 3500, 4500, 5400 (VAC); Max Leakage Current:  2mA
4/Temp. Coefficient	+-260ppm/C maximum
5/Short Time Overload	+-[2%+0.05 ohms]                                                                                      10 X wattage rating 5s.
6/Moisture Resistance	+-[3%+0.05 ohms]                                      40C, 95% RH, DC100V case to terminal (500hrs.)
7/Thermal Shock	+-[2%+0.05 ohms]                                                      Wattage rating 30min., -25C, 15minutes

DIMENSIONS

Model	Dimensions[mm]					Weight [g]
	W+_1.5	H+-1.5	D+-2	D1+-1.5	D2+-2
RA080	75	65	254	240	224	980
RA100	75	65	254	240	224	1000
RA200	90	105	440	426	410	2415
RA300	90	105	440	426	410	2530
RA400	90	105	440	426	410	2700
RA500	90	105	440	426	410	2920
RA600	90	105	440	426	410	3095
RA800	90	105	440	426	410	3430
RA1000	90	105	440	426	410	3725

ORDERING PROCEDURE EXAMPLE