|
TFA (TH) VHF/UHF THROUGH |
|
Download PDF File |
 |
HOME INTRO HISTORY PRODUCTS NEWS
TFA (TH) VHF/UHF THROUGH
HOLE ATTENUATORS
Download
PDF File
these ARE RF attenuators with 50¥Ø, 75¥Ø, 300¥Øand 600¥Ø
characteristic impedances For through hole applications.
SIP and DIP Long life and temperature stability is achieved with Ni-Cr thin film
and alumina substrates. The TFA series
will be useful in isolation circuits, data transmission, mobiles, RF
applications and measurements.
GENERAL SPECIFICATIONS
| Model | Impedance [ohm] | Impedance [dB] | Frequency | Power |
| TFA-50TF | 50 |
1,2,3,4,5,6,7,8, 9,10,16, 20,30 |
DC-100MHz | 0.25W |
| TFA-75TF | 75 | |||
| TFA-300TF | 300 | |||
| TFA-600TF | 600 | |||
| TFA-50T | 50 |
1,2,3,4,5,6,7,8,9, 10,16, 20,30,40 |
0.5W | |
| TFA-75T | 75 | |||
| TFA-300T | 300 | |||
| TFA-600T | 600 | |||
| TFA-50TS | 50 | |||
| TFA-300B | 75 | |||
| TFA-600B | 300 | |||
| TFA-85FD | 50 | DC-200MHz | ||
| TFA-85FC | 75 |
CHARACTERISTICS
|
Items |
Specifications |
Test Conditions |
|
Characteristic Impedance |
+-1%(F) |
Input DC R in terminating output port with prec. resistor |
|
Tolerance of Attenuation |
+-1% |
See Note 1 |
|
TCR of Impedance |
+/- 50ppm/C |
TCR of input DC R in terminating output port with prec. resistor |
|
TCR of Attenuation |
+/- 50ppm/C |
See Note 2 |
|
Soldering Heat |
+-1% |
350C, 3 seconds, dipping |
|
Soldering capability |
75% covered |
350C, 3 seconds, |
|
Humidity |
+-1% |
40C, 95%RH, DC0.1W, 1000H |
| Load Life | +-1% | 70C, 90min. ON, 30min. OFF, 100H |
Note 1: Output Dc volt in terminating output port with precision resistor; 1V stable DC source connected to input port.
ORDERING INFORMATION
|
Ordering P/N |
Attenuation |
Tolerance of |
|
TFA-50T6dBF |
-6dB |
F(1%) |
| TFA-75T12dBF |
-12dB |
F(1%) |
| TFA-600T20dBF |
-20dB |
F(1%) |
DIMENSIONS
Copyright
©, RARA Electronics Corporation