HOME   INTRO   HISTORY   PRODUCTS   NEWS

TSA TELECOMMUNICATION SURGE ABSORBER

Download PDF File

TSA surge absorbers protect sensitive telecommunication systems and power supplies
by absorbing the incoming voltage and current noise arising from signal generation or
by lightning strikes.  These units feature a quick response and high stability to voltage
surges and are polarity free.

GENERAL SPECIFICATIONS

Model	DC spark-Over Voltage(V)	Insulated Resistance		Capacitance (pF)
		IR(MΩ)	Measure Voltage(V)
TSA201M	160~240	Over 100	DC100	1Max
TSA301L	255~345	Over 100	DC100	1Max
TSA301M	240~360	Over 100	DC100	1Max
TSA401M	320~480	Over 100	DC100	1Max
TSA501M	400~600	Over 100	DC100	1Max
TSA601M	480~720	Over 100	DC100	1Max

CHARACTERISTICS                                                                      Values in [ ] mean change in Ω after test

Cold resistance	Specified value	-55±3C, 1000hr, measure Vs, IR, C
Heat resistance	Specified value	125±2C, 1000hr, measure Vs, IR, C
Moisture resistance	Specified value	85+2C, 85%RH, 1000hr, 1.5hr On/0.5hr Off, Measure Vs, IR, C
Dump heat, Steady state	Specified value	-55±3C(30min), Room temp(3min), 125±2C(30min), Room temp(3min), -55±3C(30min), 200times, measure Vs, IR, C
Surge life	|ᅀVs/Vs| ≤30%	Apply 10kV to charge a 1.5nF capacitor, 200times, 10sec interval
Surge current capacity	|ᅀVs/Vs| ≤20%	10/700μs 1.5kV 37.5A±5times

 APPLICATIONS

DIMENSIONS

Model	Dimension(mm)
	L	φD	I	Φd
				T type	R type
TSA	7.0±0.5	3.1±0.5	28.0±3.0	0.5±0.05	0.68±0.05

ORDERING PROCEDURE EXAMPLE

Copyright©, RARA Electronics Corporation
Tel:82-32-817-4325 Fax:82-32-817-4329